xyn305x2 xyn305 User Manual -1-
Content 1 General Information................................................................................................................................................4 1.1 Profile.............................................................................................................................................................. 4 1.2 Safety Information ..........................................................................................................................................
4 Input method ..........................................................................................................................................................18 4.1 Icons for Input Methods................................................................................................................................ 18 4.2 To Shift Entry Methods................................................................................................................................. 18 4.
1 1.1 General Information Profile Please read this pamphlet carefully in order to make your phone in perfect condition. Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone. Due to different software and network operators, display on your phone may be different, refer to your phone for details. 1.
Please make sure that your mobile phone is powered off in flight. ¾ SWITCH OFF BEFORE ENTERING RISKY AREAS Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas. Turn off your mobile phone before entering a place susceptible to explosion, such as an oil station, oil tank, chemical plant or a place where a blasting process is under way.
Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the Dial key. Give your location and state your situation briefly. Do not end the call until told to do so. Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems. Some networks even do not support the emergency call service.
2 2.
2.2 Functions of Keys The mobile phone provides the following keys: Left and right soft key The bottom line on the screen displays the functions of the Left and Right soft key.
In idle screen, you can press left soft key then * key to lock keypad. When the keypad is locked, you can press left soft key then * key to unlock it. Press and hold the * key twice to input "+" in standby interface. "+" are used for dialing an international call. 3 3.
Note: After powering off your mobile phone, wait for a few seconds before removing or inserting an SIM card. Exercise caution when operating an SIM card, as friction or bending will damage the SIM card. Properly keep the mobile phone and its fittings such as the SIM cards beyond children's reach. Installation Hold the End key for a while to power off the mobile phone Push the back cover above the battery and remove it. Pull the left battery buckle outward and then lift the battery away.
mobile phone. PIN The PIN (Personal identification number, 4 to 8 digits) code prevents your SIM card from being used by unauthorized people. In general, the PIN is supplied with SIM card by the network operator. If PIN check is enabled, you need to input the PIN each time when you power on your mobile phone. The SIM card will be locked if you input wrong PIN code for three times. Unlocking methods as follows: -Input the correct PUK according to the screen tips to unlock the SIM card.
3.2 Installing T-Flash Card The T-Flash card is a pluggable mobile storage card inside the mobile phone. To install the T-Flash card, open its latch, place its indented side downward, insert the card into the card slot, and then close the latch. To remove the T-flash card, open its latch and slightly take the card out. And then close the latch. Note: 1. The mobile phone cannot automatically identify the T-flash card being inserted when the mobile phone is powered on.
3.3 Charging the Battery The lithium battery delivered with the mobile phone can be put into use immediately after being unpacked. Battery level indication: Your mobile phone can monitor and display the battery state. Normally the remaining energy of the battery is indicated by the battery level icon at the upper right corner of the display screen. When the battery energy is insufficient, the mobile phone prompts "Battery low".
animation disappears. Using a travel adapter: Install the battery into the mobile phone before charging the battery. Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that the adapter is fully inserted. Insert the plug of the travel charger to an appropriate power outlet. During the charging, the battery level grids in the battery icon keep flickering till the battery is fully charged.
in the right direction. Inserting them in a wrong direction may cause charging failure or other problems. Before the charging, ensure that the standard voltage and frequency of the local mains supply match the rated voltage and power of the travel charger.
danger! Note: To guarantee your personal safety and protect the environment, do not litter the battery! Return the old battery to the mobile phone manufacturer or place it in specified battery reclamation areas. Do not litter any battery with other rubbish. Warning: Short-circuits of the battery may cause explosion, fire, personal injury or other severe consequences! 3.4 Powering On/Off the Mobile Phone Hold the End key for a while to power on the mobile phone.
3.6 Dialing Calls In the standby interface, press number keys to input the area code and the telephone number, and then press the Dial key to dial a call. To end the call, press the End key. Dialing a call to a number in the phonebook Enter the phonebook and use the up or down direction keys to find the telephone number you want to call. Press the Dial key. The mobile phone automatically dials the chosen telephone number.
3.7 Using the Headset It would enter headset mode automatically when you insert headset to the slot. Make sure of inserting it at the bottom of the slot, or you can’t use it normally. 4 Input method This mobile phone provides English and numeric input method. You can use these input methods when editing the phonebook, short messages, files and greeting text. 4.
4.
End key Press it to return to the standby interface English input: Each key is used to represent multiple characters. Quickly and continuously press a key till the character you want appears. Input the next character after the cursor moves. Press the # key to switch between input methods To input a blank, switch to the English input mode (in upper or lower case) and then press number key 0. To clear wrong inputs, press the Right soft key. 4.
Unclassified, family, business, classmates, blacklist and so on. 5.2 Message If the short message memory is full, a blinking SMS icon appears on the top of the screen. To normally receive short messages, you need to delete some of the existing short messages. Write message Through this function you can create a new text message or a multimedia message. You can type a message, and you're also able to insert a pre-defined message from “Templates”. Inbox Received messages are listed in this menu.
or edit (or send a short message to it). Received Calls You can view the latest received calls. Choose received calls and then select a received call to delete, save, dial, or edit (or send a short message to it). Missed Calls You can view a list of the latest missed calls. Note: When the mobile phone indicates that some calls are missed, you can select Read to enter the missed calls list. Navigate to a missed call and then press the Dial key to dial the number that originated that call.
Call Cost Choose call cost to view the cost of the last call and the cost of all calls, reset the call cost, modify the maximum cost allowed, and/or set the call tariff. Note: The call cost function relates to the SIM card. Some SIM cards do not support this function. The PIN2 is provided by the network operator. To obtain the PIN2, contact the network operator. 5.4 Settings Call Settings Network selection: Set Network selection mode to Automatic or Manual. Automatic is recommended.
network will make a response and send a message to acknowledge your operation. If the call waiting function is activated, the network will alert you and the mobile phone screen will display the incoming call number if others are calling you while you are already in a conversation. Hide ID: When you call someone, he or she can’t find out your number if you enable this function. Select line: Switch to Line 1 or Line 2. By default, Line 1 is used. Note: If you choose Line 2, dialing may fail.
Restore factory settings: Use this function to restore factory settings. The initial password is 1234. Display settings Users can access this item to set wallpaper, backlight, animation effect, etc. Security Settings PIN: The PIN (Personal identification number, 4 to 8 digits) code prevents your SIM card from being used by unauthorized people. In general, the PIN is supplied with SIM card by the network operator.
Connection management Access this menu to set network account related parameters. 5.5 Camera Use this function to capture pictures. In the capture interface, press left or right direction key to access options; up or down direction key to zoom in or zoom out; OK key to capture photos. 5.6 Multimedia Audio Player Use this function to play audio files.
Video recorder This function enables you to record dynamic pictures. You can press OK key to capture videos clip; left soft key to access Options; right soft key to exit capture interface. Recorder Use this function to record audio files. The phone support WAV. The recording file you stopped would be stored in file list automatically. Image browser You can view the pictures or images through this function.
Choose File manager to enter the root directory of the memory. The root directory will list the default folders, new folders and user files. When the mobile phone is powered on for the first time or when you have not changed the directory, the root directory contains the default folders only. You can use this function to format all the data in the memory. The system will re-create a default folder. The formatted data cannot be recovered. Therefore, think twice before using the formatting function. 5.
Press the up, down, left and right key to select ＋, －, ×, ÷ respectively. Press right soft key to delete the figure. World clock The world clock can show the local time and other time zone time: Press right, left key to select different time zone STK STK service is the tool kit of SIM card. This phone supports the service function .The specific items are depended by SIM card and network. Service menu will be auto added to the phone menu when supported by network and SIM card. 5.
Adjust volume: Set the volume of the incoming ringtone, message ringtone, earpiece ringtone, keypad tones, alarm and power on/off tone. Call alert: Select ring, vibrate, silent, ring and vibrate, or vibrate then ring mode. Message alert: Select ring, vibrate, silent or ring and vibrate. Alarm & calendar remind: Select ring, vibrate, silent or ring and vibrate. Key tone: Silent, Ringtone1 and Ringtone2 are available. Users can select one of them as needed.
SIM card error Poor received signal quality The SIM card is damaged. The SIM card is not in position. The metal face of the SIM card is polluted. Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.
Line congestions occur when you use the mobile phone in high-traffic hours Avoid using the mobile phone in high-traffic hours The mobile phone cannot be powered on The battery energy is exhausted.
The mobile phone cannot connect the network The battery cannot be charged The SIM card is invalid Contact your network service provider The mobile phone is not in a service area of the GSM network Move to the network operator's service area The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the
Poor contact Ensure the charger plug is in good contact with the mobile phone FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
