User's Manual

5
3.5 Safety Password
3.5.1 PIN number
By setting PIN number (Personal identification number), it can prevent others from using your SIM
card without authorization.
3.5.2 PIN2 number
In order to go to “call cost” and “fixed dialing”, please contact your network service provider to
confirm whether your SIM card supports such functions. After 3 times of error PIN2 number, the PIN2
number will be locked. Only after the correct PUK2 number is input can PIN2 number be unlocked.
PUK2 number may be provided along with the SIM card.
3.5.3 PUK number
In order to unlock the blocked PIN number, you need to input PUK number (Personal Unlocking Key).
3.5.4 Mobile phone password
If you select this function, you need to input the password every time when starting up your phone.
Otherwise, you cannot unlock your phone, and cannot dial or answer phone calls. Also, your can
deactivate this password.
4 Quick Use Guide
4.1 Call functions
4.1.1 Make a call
The information scales displayed on the upper left screen indicate the intensity of network signal (of
which 5 scales appeared indicating the strongest signal).
Ways to enter into the call screen：
Dialing numbers: In standby mode, please input the numbers in the cursor input box, and dial the
number by pressing the dial key.
Dialing numbers in phonebook: In standby mode, press right soft key to go to the phonebook menu.
After find the contact, dial the number by pressing the dial key.
Dialing numbers in call list: Through the list of missed calls, dialed calls and received calls, select the
corresponding call and dial the number by directly pressing dial key, or dial the number by entering
into the options in the current list to select the number.
 Domestic number: zone code + tel. number + dial key
 An extension to a fixed phone: zone code + switchboard number + “P” + extension number +
dial key
 Input “P” as below: Long press or short press “*” key for three times (“P” will appear on the
screen).
 International fixed number: “＋” country code + telephone number + dial key
 In order to input “+”, long press or short press “*” key for two times (then the screen will show
“+”)
During dialing, you can press the end key to end the call you are dialing.
4.1.2 Answer a call
When a call comes in, it enters into the phone-in screen, alert ing you with presetting ringing tone or