User's Manual

4. Fit the battery with the metallic contacts at the right bottom comer.

5. Replace the back cover by fitting it to the back of the phone.

Install Battery

(1)Connect the battery’s metal touch points separately with the battery compartment metal

touch points, and enter the battery base to the slot.

(2) Slide the back cover toward the top of the phone to lock the cover into its place.

Remove Battery

Remove the back cover then push toward the bottom of the phone and lift the battery at the

at the top side center to remove.

z Settings and data stored in the phone or SIM card may be lost after the battery is

removed.

4..

Charge Battery

Connect the charger to power supply, and then insert the charger pin into the I/O jack.

Note:

1. When charging, DO NOT removes or takes out the battery to avoid the battery circuit to

burn out.

2. While charging, it is normal that the phone and charger will become hot.

3. If the battery is completely empty, it may take a period of time before the charging icon

appears on the display.