User's Manual

please contact with the supplier. The default PIN code is 0000 usually.
10.3.2 Phone Lock
Phone lock can be used to lock the device to avoiding unauthorized use.
Set the phone to ask for your security code each time you start your phone.
10.3.3 Auto Keypad Lock
You can set the auto lock time in the submenu of this function, then the key will
automatically be locked if there is no more action of the phone.
10.3.4 Fixed dial
If your SIM support fixed dial, it can limit you to call fixed number. When the function is on, it
can only call the phone number or phone number start by the fixed dial number.
Note: it needs you to input PIN2 code to open or close this function. You can get the PIN2
code from service supplier. If the fixed dial is on, the phonebook only show the number of
fixed dial.
10.3.5 Barred dial
10.3.6 Change Password
You can change phone lock password here.
10.5 Restore factory settings
You can reset some of the Phone settings to their original values by input phone lock
password.
11. Services
11.1 Wap
Your phone support WAP function. After the necessary settings, you can use this function
normally.
Note: To open this function, you should apply GPRS service to your SIM card.
In WAP user can visiting homepage, display the exist bookmarks, record the website you
have visited recently, store the information sent from the service provider and setting WAP.
11.2 Data account
It contains “GSM Data” and “GPRS” data account.
In order to use WAP function normally，please right setting: Account Name, DNS, user name
and password.
11.3 Connection management
Show the current active connection
12. User profiles
User profiles define how your phone reacts when you receive a call or a message, how your
keypad sounds when you press a key, and more. Each of the available profiles can be left at
their default setting or customized to suit your needs. Select and customize the most
suitable profile for your situation. The available modes are General, Meeting, Outdoor, Indoor,
Headset,stint porfile. In standby mode, you can press and hold chr key to switch to silent
mode.