User's Manual

9
2.2 Battery
 The initial battery is of 50% charge, so it can be used right after being unpacked. The new battery should
be charged at least for 14 hours. Only when the initial battery is exhausted thoroughly (the electricity quantity
runs out and the mobile phone can not power on) can the battery be fully recharged for use, so does the
second time charging. Only when recycled for three times in this way can the battery works in the best
condition easily.
2.2.1 Charge the Battery
 Connect the batter charger to a power supply;
 Insert the plug of the battery charger into the right side of the mobile phone (note: with arrow face upwards).
 Then the power quantity indicator in the upper right corner of the mobile phone screen will flicker. If the
phone has been powered off, the screen will display “charging” and this indicates that the battery is being
charged. If the phone is still in use despite of lack of power, the power indicator may take some time to appear
on the screen.
 If the power indicator is full and stops to flicker, this means that the charge has been finished. This process
often takes 3 to 4 hours. It is normal that, during charge, the battery, mobile phone and battery charger
become hot.
 After the charge is completed, please disconnect the AC power supply socket and the mobile phone with the
battery charger.
*Note:
--During the charge, the handset should be placed where the ventilation is good and the temperature is between
+5
0
C to +40
0
C. In addition, you should use the charger provided by the manufacturer, for the unauthenticated
chargers may cause danger and disobey the recognition and maintenance clauses of this mobile phone.
--When your mobile phone automatically powers off or displays the warning of “Low Power”, you should
charge the battery in time. In case the battery has not run out before charge, the mobile phone will shorten the
charge time automatically.
--The standby time and call time provided by the manufacturer is based on the ideal working environment.
During the practical use, the battery’s service time changes with the network condition, working environment
and use mode used.
--Before charging the battery, please make sure that the battery is properly inserted and it is forbidden to take it
down during charging. .
--When charge is over, please disconnect the charger with the mobile phone and the battery.
If you do not disconnect the charger with the power supply and the mobile phone, after a long time (about 5 to 8
hours), the power of the battery will drop to a certain level and the mobile phone will resume charge once again.
We do not recommend you to do so, for this will affect the performance and service life of the battery.
--This mobile phone does support USB port, so you can connect your mobile phone with PC through USB, it
just use to charging the battery.