User's Manual

------IP dial: enable IP call and edit IP number. You can edit up to 3 numbers.

------Call time display: enable or disable Call Time Display in the calling process.

------Call time reminder: enable or disable Call Time Alert (beep) in the calling process and set the alert

period.

------Auto quick end: enable or disable this option. If it is enabled, the call ends automatically when it reaches

specified time.

------Reject by sms: switch on/off reject the call by sms.

4.20.5 Network Settings

 SIM1 Network Setup:

------Network selection:

 New search: re-subscribe to newly scanned network.

 Select Network: select network for the SIM card.

 Selection Mode: select Manual or Auto.

------Preferences: Pre-store several networks.

 SIM2 Network Setup:

------Network selection:

 New search: re-subscribe to newly scanned network.

 Select Network: select network for the SIM card.

 Selection Mode: select Manual or Auto.

------Preferences: Pre-store several networks.

4.20.6 Security Settings

 SIM1 security setup:

You can set security options in this menu to avoid illegal operation of the mobile phone or SIM1.

------SIM1 lock: the PIN code can prevent your SIM card from illegal operation. If the PIN code is disabled, select

Enable and you can start PIN code protection. The mobile phone asks you to input the PIN code the next time you

switch on the phone. If the PIN code is enabled, select Disable and you can stop PIN code protection. Select

Change PIN code and you can set new PIN code. Please input old PIN code, new PIN code and repeat new PIN

code according to the prompt.

*Note: If you input invalid PIN code for three times continuously, the SIM card is locked and you need the

PUK code to unlock the SIM card. The PIN code and PUK code may be provided together with SIM card.

Please contact your network operator if not. The default PIN code is 1234. Please change it into your own

private password as soon as possible.

------Fixed dial:

When this function is enabled, you can only dial the numbers in FDN or numbers begin with certain numbers

(need SIM card support).

 Mode: enable/disable fixed dialing function (need to input the PIN2 code).

 Fixed dial list: input the telephone numbers of fixed dialing.

------Barred dial: opposite to fixed dialing, you can set to disable dialing certain numbers.

------Change password: change the password, including PIN, PIN2 and phone password.