User's Manual

30
 Dual SIM open
Insert two SIM cards and they both subscribe to GSM network and stand by.
 Only SIM1 open
Insert two SIM cards, but only SIM1 is activated and in standby.
 Only SIM2 open
Insert two SIM cards, but only SIM2 is activated and in standby.
Note: The card in left slot is SIM1 and the card in right slot is SIM2. If you have two SIM cards, you can select
Dual Card or Single Card mode after switching on the mobile phone. If two cards are activated, the network
names are displayed in two lines with SIM1 network in first line and SIM2 network in second line.
Flight Mode: select required mode.
4.20.2 User Profiles
4.20.2.1 General
 Activate: select this option to activate General profile.
 Customize: select and access this option to customize General profile. Available options are:
------ Tone Setup: customize the ring tone of incoming call of SIM1/SIM2, power on/off, SIM1/SIM2
messages and key-pressing.
------ Volume: adjust the volume of ring tone and key-pressing.
------ Alert type: select Ring, Vibrator, Vibrator and Ring, Vibrator after Ring.
------ Ring type: Single, Repeat or Ascending.
------ Extra tone: Set the alert tone of warning, error, network connection and call.
------ Answer mode: enable/disable “Any Key Answer” and cover answer.
4.20.2.2 Meeting
The operation is same as General.
4.20.2.3 Outdoor
The operation is same as General.
4.20.2.4 Indoor
The operation is same as General.
4.20.2.5 Headset
This mode is activated automatically when headset is inserted. The setting is same as General profile.