User's Manual

2 Your Mobile Phone
Our company reserves the right to make modifications to the contents of this manual
without any prior notices.
2.1 Keys and functions
Name Functions
Center key Enter the main menu interface
Right soft key Enter the phonebook; carry out the corresponding
operations displayed on the right bottom of the screen.
Left soft key Enter the main menu interface; carry out the
corresponding operations displayed on the left bottom of
the screen.
SIM Send key Answer, dial, receive calls for SIM
(Answer, dial, receive calls for SIM)
End key Short press: return to standby interface in any mode
Long press: Power off(Power on in power off state)
Direction keys You can switch the shortcuts of the standby interface
1 Short press: go to number input screen and input number
1
0, 2~9 Short press: go to number input interface, and input
numbers 0, 2~9.
Long press: keypad lock
*
Short press: go to number input screen and shift input *
Short press: go to number input screen and input #
Numeric keys
#
Long press: Silent mode
Note: In this manual, “short press” a key means press then quickly release the
key; “long press” a key means press the key and hold for not less than 2 seconds
3 Get Started
3.1 On/off
Long press end key to power on/off your mobile phone.
If you start up your mobile phone without inserting SIM card, the following two
situations will appear:
“insert SIM ” –indicates no SIM card found, but you can call emergency call.
“Enter Phone Lock Code” – indicates that you have set mobile phone lock.
After inserting SIM card, the handset will automatically check if the SIM is valid.
Then, the following prompts will be displayed in order on the screen:
“Enter Phone Lock Code” – in the case you have set mobile phone lock.