User's Manual

 PIN lock: Press Activate to enable PIN lock, which will require you to
input a password when the mobile phone is started up. Otherwise, the
SIM card is unavailable.
 Change PIN: You can change the PIN password.
 Change PIN2: You can change the PIN2 password.
 Phone security: after the phone lock is activated, the correct password is
required to start up the phone or restore the factory settings. The factory
setting is 1234 by default.
 Auto Keypad Lock: press the left soft key to deactivate the keypad lock, or
select automatic lock after 5s, 30s, 1 minute, or 5 minutes.
6.8.4 Connectivity
Can set the GPRS Data account.
6.8.5 Restore factory setting
Some function settings can be reset to factory settings by this option.
This function requires the correct password to be executed.
The factory password is preset as 0000.
6.9 User Profiles
You can select different modes on different occasions to carry out the personal
settings in the environment modes such as ring tone, vibration, volume, etc. This
function makes it possible to get adjusted to different situations without changing
the ring tone settings at multiple places, and you only need to switch to the pre-set
environment mode.
 General mode: It is ringing alert by default;
 Silent mode: It is no ringing alert by default;
 Meeting mode: It is vibrating alert by default;
 Outdoor mode: It uses the maximum volume, vibration + ringing alert, by
default;
 My style mode: It can set personal alert settings.
You can edit the following in a separate manner:
 Alert type: set the alert type: Ring only / Vib. Only / Vib and Ring / Vib then
Ring.
 Ring type: set the ringing type: Repeat / Ascending / Beep once
 Incoming call: set the incoming call ringtone.
 Ringtone volume: set the ringtone volume
 Message: set the message tone
 Message volume: set the message tone volume
 Keypad: set the keypad tone
 Keypad volume: set the keypad tone volume
 Power on: set the power on ringtone
 Power off: set the power off ringtone