User's Manual

When you perform following operations, ensure the cell phone is powered

off and separated with charger.

Remove the battery and take out SIM card from holder.

Note: SIM card is a computer chip containing protocol details,

security information and personal phonebook, etc.

2.5 Power on/off

Ensure battery is properly installed.

Power on and hold [End key] button until boot screen appears.

Some SIM cards have PIN code protection. If there is prompt for input your

PIN code, input your PIN code and then press [OK].

Default PIN code is 1234.

After power on, if SIM card inserted is valid, your cell phone will

automatically search available network; If not, it will prompt: No SIM card is

available.

To power off, hold [End key] until Sliding interface shutdown appears，then

sliding shutdown.

2.6 Security password

You can use access password to avoid unauthorized use of your SIM card.

2.6.1 PIN code

PIN code is used to prevent illegal use of user’s SIM card. If your cell

phone has enabled PIN code protection, there will be prompt for entering

PIN code. If wrong PIN code is entered for three times, SIM card will be

automatically locked. You have to enter PUK code so as to unlock it. PIN

code is related to SIM card instead of the cell phone, and is provided by

network service operator.

2.6.2 PUK code

PUK code, referring to personal unlock code, is used to unlock SIM card

that is locked because of wrong input of PIN code. If wrong input of PUK

code amounts to ten times, SIM card will lose efficacy. PUK code is

provided by network service operator.