User's Manual

Instructions before Use

2.1 Install or remove the battery

2.1.1 Install battery

1. Aim the small button at the bottom of battery to corresponding slot at the

bottom of battery bank.

2. Press battery towards the cell phone and press it until it is locked.

2.1.2 Remove the battery

Guaranteed that your handset is at the close-down condition.

Holds down at the back of the handset, the downward glide outer covering,

then unloads the battery exterior top plate.

1．Holds down at the back of the handset, the downward glide outer

covering, then unloads the battery exterior top plate.

2．Under covers in the chart the battery to buckle hand's position, lifts

gently the battery and takes down.

2.2 Charge battery

Hold buttons at the two sides of the battery charger and then plug the

charger to the charging socket at the bottom of cell phone。

Note: Please handle carefully. Do not pull out charging plug by

force. This may damage your cell phone or charger.

• Before use, battery supplied with your cell phone should be completely

charged.

• While charging, do not remove the battery or SIM card.

• Once battery is used up, the cell phone will shutdown automatically.

2.3 Install SIM card

• When SIM card is not used, carefully put it in a secure place.

• SIM card is easy to be damaged because of scratching or bending, so it

should be used carefully.

When you perform following operations, ensure the cell phone is powered

off and separated with charger. Remove the battery and put SIM card in

fixer. While inserting SIM card, ensure the metal side faces downward and

aim the cut-corner of SIM card at that of SIM card slot.

2.4 Remove SIM card