User's Manual

2. Unlock

After the screen is off, please press 【Power】to wake up the screen, and then drag the

slider upwards to the green ball to unlock the screen.

Note: Drag the slider downwards to the white ball to switch between Sound and Vibrate state.

Home Screen

1. Desktop

2. Applications

On the shortcuts bar, touch to enter Main Menu for all applications, Touch

【Back】or 【Home】return to the previous screen; On Main Menu, long press any

application till the check box appears, drag it onto one of desktops, put it on the

idle place. According to such operations, you can place any application to your

favorite position.

Status Bar

You can’t operate the status bar, it displays some relevant information, including: GPS,

Bluetooth, Wifi , battery power , system time, etc.

Notification Bar

Slide the screen from top to bottom in any interface, and it will display the

notification bar,Then you can hide the notification bar by sliding the screen from

bottom to top.

Preparation and Installation

1. Plug and Unplug SD Card

Please plug or unplug SD Card when the device power off. It is forbidden to carry

out this operation when the device is running. Any data loss or damage resulting

from the faulty operations is attributed to users.

2. USB disk Identification

The device supports hot-plug of USB disk. After USB disk is inserted, you can

dealing with data in USB disk after its light is on. Please refer to “File Manager”

for the usage of US Disk.

Note: It is forbidden to remove USB disk when data in USB disk is being copied,

transferred or deleted to prevent data damage.

3. Transferring Data With Computer

3.1 Install USB