User's Manual

22
y Widget order: Sort according to own preferences.
¾ Shortcuts manager: You can use the shortcut feature set contained portions of the menu appear in the shortcut menu.
¾ Display
y Wallpaper: Select your favorite picture as the wallpaper of the standby window.
y Menu page transition: You can select one of the following animation as menu transition effects.
y Lock screen image:
You can set the lock screen icon from System or User defined.
y Screen auto lock: Set the automatic lock screen time.
y Power on display: You can set the boot screen display from System or User defined.
y
Power off display: You can set the Shutdown screen displays from System or User defined.
¾ Flight mode: Switch flight mode and normal mode.
¾ Misc. Settings
y LCD Backlight: here are set LCD brightness and time.
6.10.3. Network settings
You can set up the phone network with this function.
¾ Network selection: choice the modes of searching the phone network, including Auto and Manual modes.
¾ GPRS connection: Select the desired connection or has been connected to。
¾ GPRS transfer pref: Select the data priority or call priority.
6.10.4. Security settings
You can manage your phone safely with this function.
The phone lock password, SIM card password support 4-8digit numbers, do not support other characters. The original password of the phone when leaving the
factory is 0000. The password and PIN2 and SIM card are provided by the network operator. When the PIN is input wrongly in successively three times, the SIM
card will be locked.
The PUK /PUK2 are required to input if you want to unlock the SIM card. The PUK/PUK2 is provided by the network operator. If the PUK is input wrongly in
successively 10 times, the SIM card will be locked and discarded permanently.
6.10.4.1. SIM1 security
y PIN lock: open or close the PIN lock function. When PIN lock is launched, the PIN shall be input upon each power-on.
y Change PIN: PIN lock must be enabled, Just can be change.
y Change PIN2: input the correct PIN 2. Just can be change.
The SIM2 security setup is same to the SIM1 security setup.
6.10.4.2. Phone security
y Phone lock: Open or close the phone lock function. When the phone lock is launched, the phone lock password shall be input upon each power-on.
y Change password: You can change the phone password.