User's Manual

20110613_KOL_ENG_SS
3.4 Battery Recharge
Connect the battery charger to a power supplier, plug the connector of the battery
charger into the mobile phone. Then the power level indicator at upper right
screen will flash. If the phone is off when charging, the screen will display
“charging” indicating the battery is being charged. If the phone is deposited for
long time, the power indicator may take some time to appear on the screen. If the
power indicator at upper right screen of the phone displays battery full and stops
to flash, it means that the charge is done. If the phone is off, the screen will display
a Charge Completed indicator. During charge, it is normal if the battery, mobile
phone and battery charger are not. After charging, disconnect the mobile phone
and battery charger.
This phone is just 50% charged when delivery. Please use up the power and
recharge it fully. This is the case with the second recharge. After three repetitions,
the battery can achieve its best performance.
4 Safety Password
4.1
PIN number
By setting PIN number (Personal identification number), it can prevent others from
using your SIM card without authorization.
4.2 PIN2 number
Please contact your network service provider to confirm whether your SIM card
supports such functions. After 3 times of error PIN2 number, the PIN2 number will
be locked. Only after the correct PUK2 number is input can PIN2 number be
unlocked. PUK2 number may be provided along with the SIM card.