User's Manual

3 Get Started
3.1 On/off
Long press end key to power on/off your mobile phone.
If you start up your mobile phone without inserting SIM card, the following two
situations will appear:
“insert SIM ” –indicates no SIM card found, but you can call emergency call.
“Enter Phone Lock Code” – indicates that you have set mobile phone lock.
After inserting SIM card, the handset will automatically check if the SIM is valid.
Then, the following prompts will be displayed in order on the screen:
“Enter Phone Lock Code” – in the case you have set mobile phone lock.
“Enter PIN” – in the case you have set SIM password.
“Invalid SIM” –in the case you log on other networks, you can only dial emergency.
”Searching” –mobile phone will search until proper network access is found.
3.2 Assembling of battery and SIM card
Before your can operate the mobile phone, you should get a valid SIM card from
the service operator, otherwise, you could not make any call except emergency
call.
1) Take out the battery
 Pull down the battery cover
 Take out the battery
2) Assemble SIM card
This mobile phone supports two SIM cards. Insert one or two SIM cards to the
sockets.
3) Assemble battery
Assemble the battery as the figure; be careful that the contact metal of the
battery should be consistent with the socket of the mobile phone.
Push up the battery cover as the figure.