User's Manual

30
4.9 User profiles
You can select different modes on different occasions to carry out the personal settings in the environment
modes such as ring tone, vibration, volume, etc. This function makes it possible to get adjusted to different
situations without changing the ring tone settings at multiple places, and you only need to switch to the
pre-set environment mode.
 General mode: It is ringing alert by default;
 Silent mode: It does not have ringing and vibrating alert
 Meeting mode: It is vibrating alert by default;
 Outdoor mode: It uses the maximum volume, vibration + ringing alert, by default;
 My style mode: You can set your own alert mode.
In every mode, you can edit the following in a separate manner:
 Alert type: 4 manners are available: ringing, vibration, vibration and ringing, and vibration then
ringing.
 Ring type: Single, Repeat or Ascending.
 SIM1/2 Incoming call: set the tones for incoming calls, power on, power off, messages tone and
keypad tone, respectively.
 Ringtone volume: set the incoming ringtone volume
 SIM1/2 message: set the tones for SIM1/2 message
 Message volume: set the message tone volume
 Keypad: set the keypad tone
 Keypad volume: set the keypad tone volume
 Power on: set the power on tone
 Power off: set the power off tone

System alert: switch on or off the system alert
4.10 Extra
4.10.1 Calculator
Press the Direction keys to input the four operators +, -, ×, ÷.
Press the Right soft key to clear last number or result; press the Right soft key “Back” to exit calculator and press the
Left soft key or OK to calculate.
* Note: The precision of the calculator is limited and there are errors, especially when it is indivisible.
4.10.2 Stopwatch
It is a timer. Common stopwatch and multi-directional stopwatch are available.
¾ Typical Stopwatch:
------ Split Timing: record the time of every circle or every person.
------Lap Timing: record the circle time of a person.
------ View record: view the recorded time.