User's Manual

17
 text msg. counter
 Sent: record the number of short messages you have sent.
 Received: record the number of short messages you have received.
*Note: You can press the Left soft key to clear these two items separately.
 GPRS counter
 Last sent: record the byte number of last sending.
 Last received: record the byte number of last receiving.
 All sent: record the byte number of total sending.
 All received: record the byte number of total receiving.
 Reset counter: Take count again.
4.4.2 call settings
 Call settings
------ Caller ID
 Set by network: whether sending number or not depends on system default.
 Hide ID: you can answer calls only. It prompts “Check Network” when you make calls. (Need network
support)
 Send ID: the other party can see your number when you make a call.
------ Call Waiting: select Enable, Disable or Check.
------ Call divert:
 Divert all voice calls: enable this option and all the incoming calls are diverted to the specified number.
 Divert if unreachable: enable this option and all the incoming calls are diverted to the specified number if the
other party can’t dial through your number.
 Divert if no answer: enable this option and the incoming calls are diverted to the number you set if your mobile
phone isn’t answered.
 Divert if busy: enable this option and all the incoming calls are diverted to the specified number when you are
busy.
 Divert all data calls: Transfer if it is data call.(Need network support)
 Cancel all diverts: cancel all settings of call diverting.
------ Call barring: set Call barring.
 Outgoing calls: bar outgoing calls.
 Incoming calls: bar incoming calls.
 Cancel all: cancel barring (need to input the PIN2 code).
 Change barring password: change the password.
------ Line switching: select Line 1 or Line 2.
 Advance settings
------Blacklist: set Blacklist and save the numbers that you don’t want to answer. The incoming call is rejected
automatically if it is from the number in the Blacklist.
 Switch blacklist on/off.
 Set blacklist list: set Blacklist and save the numbers that you don’t want to answer.( You can save up to 20
telephone numbers in Blacklist)
------Whitelist: set Whitelist and save the number that you want to answer.
------Auto redial: enable or disable Auto Redial when the other party is busy or the call isn’t answered.