User's Manual

13
 Because some of the extensions to the fixed phones can not be got through directly, you need to dial the switchboard
and then the extension to the fixed phone. When you input the telephone number, if insert character “P” between the
switchboard number and the extension number, the mobile phone will complete all the dialing for you, i.e.
automatically dial the extension and get through. Input character “P” as below: Long press “*” key (“P” will appears
on the screen).
 Zone code+ switchboard number+ P + extension number + dial key
 International call:
 To make an international call, long press “*”key until the international long distance call prefix symbol “+”appears
on the screen. This allows you dial in any country even if you do not know the local international call prefix (e.g. it
is 00 in China).
 After the prefix is input, enter the zone code of the country you want and the complete dial number. The zone code is
usually subject to conventions, 49 for Germany, 44 for U.K. and 46 for Sweden, etc.
 Like dialing a long distance call, “0” in the city code should be dropped when dialing.
 E.g. To dial the service hot line of other countries, you should dial:
 +86 21 114
 +country code+ the complete dial number+ dial key
 Emergency call
 If your mobile phone is within the network coverage (you can check the network signal intensity bar on the top left
corner of the screen), you will be able to make an emergency call (the emergency call can be made without the SIM
card). If the network supplier provides no roaming service in the region, “Emergency Call” will appear on the screen
to tell you that you can only make this kind of calls.
3.2.2 Answer a call
 In a normal condition, when there is an incoming call, press the dial key to answer the call.
 If the “any key for answer” is set on, then you can press any key to answer the call.
 If the handset is inserted, you can also press the keys on the handset to answer a call. If it is not convenient, you can
set “auto answer” to on and make sure that the handset is inserted. The call will be automatically got through after
two seconds’ ringing or vibration.
3.2.3 Reject a call
 When there is an incoming call, select “reject” to reject the call.
3.2.4 Menu available during a call
 During a call, you can press Option key to enter call menu. The operation method of the call menu is the same with
that of the function menu.
 The call menu can only be seen during a call. Besides, functions, such as call waiting, holding on a call, and
multiparty meeting, need to be supported by the network. Please contact with your network provider.