User's Manual

12
*Note: The mobile phone does not support hot-plug function of T-FLASH in “power on” mode. Only when the mobile
phone is powered off can T-FLASH be pulled out. Restart up and T-FLASH will come into effect.
When using or editing files stored in the memory card, DO NOT pull out the memory card.
3 Basic Description
3.1 About the Keypads
3.1.1 Basic Keys
 Left soft key: Execute the function indicated on the bottom left screen.
 Right soft key: Execute the function indicated on the bottom right screen.
 OK key: confirm the selection
3.2 Call functions
 When the logo of the network service provider appears on the screen, you then may make or answer a call. The info
bar implicates the signal intensity on the top left screen (the 4-scale info bar means the signal is the strongest).
 Call quality performs variedly under the influence of the obstacles. Therefore the movement in a small scope may
improve the signal intensity effectively.
3.2.1 Make a call
 Domestic call:
 You can input the telephone number via on screen keypad to input the telephone number you want. Press the dial key.
If you need to change the telephone number, press the right soft key to delete the inputted characters. During the
dialing, the screen will display a “dialing” cartoon. The screen will display the call status information. If the
answering tone is switched on, there will be a warning tone.
 When then call ends, please press Hand-up key to end the call.
 zone code + dial number + Dial key
 Dial the extension to a fixed phone: