User's Manual

10.3 Network setup

This feature is available to operate network settings when you are roaming or travel

outside. Access the menu; you can select the network manually or automatically.

Before use the network, you must contact your local service provider or the roaming area

before you use this function.

1. Add from list：Add a network from PLMN list.

2. New：Add a new network.

3. Change priority：Change the priority of the network.

4. Delete：Delete the current network.

10.4 Security setup

You can set the security settings to protect the phone or SIM card from unauthorized use.

The default security code is 1122.

10.4.1 SIM1/SIM2 Security setup

z SIM Lock

Set the phone to ask for your PIN code each time you start your phone (if this function is

supported by your SIM card).

Note: After three consecutive incorrect PIN code entries, the code will be blocked, and you

need the PUK code to unblock it.

The PIN code and PUK code are usually supplied by the SIM card. If you don’t get them,

please contact with the supplier. The default PIN code is 1234 usually.

z Fixed dial

If your SIM support fixed dial, it can limit you to call fixed number. When the function is on, it

can only call the phone number or phone number start by the fixed dial number.

Note: it needs you to input PIN2 code to open or close this function. You can get the PIN2

code from service supplier. If the fixed dial is on, the phonebook only show the number of

fixed dial.

z Barred dial

If your SIM support barred dial, it can limit you not to call barred number. When the function

is on, it can not call the phone number in the barred dial list.

Note: it needs you to input PIN2 code to open or close this function. You can get the PIN2

code from service supplier. If the fixed dial is on, the phonebook not show the number of

barred dial.

z Change password

You can change PIN code, PIN2 code here.

10.4.2 Phone Lock

Phone lock can be used to lock the device to avoiding unauthorized use.

Set the phone to ask for your security code each time you start your phone.

10.4.3 Auto Keypad Lock

Press left soft key in standby mode, by press right soft key then ctrl key to lock the keypad. If

the keypad is locked, you can unlock it by pressing right soft key, then press ctrl key.