User's Manual

2 Your Mobile Phone
Our company reserves the right to make modifications to the contents of this manual
without any prior notices.
2.1 Keys and functions
Name Functions
Menu soft key Enter the main menu interface
Right soft key Enter the phonebook; carry out the corresponding operations
displayed on the right bottom of the screen.
SIM1/2 Send key Answer, dial, receive calls for SIM
Power key Long press: Power off(Power on in power off state)
End key Short press: return to standby interface in any mode
Volume key Adjust the volume level
1 Short press: go to number input screen and input number 1
0, 2~9 Short press: go to number input interface, and input
numbers 0, 2~9.
Long press: Speed dial
*
Short press: go to number input screen and shift input *
Numeric
keys
# Short press: go to number input screen and input #
Note: In this manual, “short press” a key means press then quickly release the key;
“long press” a key means press the key and hold for not less than 2 seconds
3 Get Started
3.1 On/off
Long press power key to power on/off your mobile phone.
If you start up your mobile phone without inserting SIM card, the following two
situations will appear:
“insert SIM ” –indicates no SIM card found, but you can call emergency call.
“Enter Phone Lock Code” – indicates that you have set mobile phone lock.
After inserting SIM card, the handset will automatically check if the SIM is valid.
Then, the following prompts will be displayed in order on the screen:
“Enter Phone Lock Code” – in the case you have set mobile phone lock.
“Enter PIN” – in the case you have set SIM password.
“Invalid SIM” –in the case you log on other networks, you can only dial emergency.
”Searching” –mobile phone will search until proper network access is found.