User's Manual

6.1.1 Airplane mode

The place where you can not use the wireless signal, such as aircraft, you

have to turn off or turn on fly Mode. Turn flight mode, the title bar would have

the icon and have notifications.

6.1.2 Wi-Fi

Wi-Fi provides wireless Internet access over distances of up to 100 feet (100

meters). To use Wi-Fi on your phone, you need access to a wireless access

point or “hotspot”.

Note: The availability and range of the Wi-Fi signal depends on the number,

infrastructure, and other objects through which the signal passes.

6.1.2.1 Turning Wi-Fi on and connecting to a wireless network

1. Tap Settings > Wireless controls.

2. Select the Wi-Fi check box to turn Wi-Fi on. The phone will scan for

available wireless networks.

3. Tap Wi-Fi settings. The network names and security settings (Open

network or Secured with WEP) of detected Wi-Fi networks are displayed in

the Wi-Fi networks section.

4. Tap a Wi-Fi network to connect. If you selected an open network, you

will be automatically connected to the network. If you selected a network that

is secured with WEP, enter the key and then tap Connect.

6.1.2.2 Checking the wireless network status

You can check the current wireless connection status from the following:

• Status bar

When your phone is connected to a wireless network, the Wi-Fi icon

appears in the status bar and tells you the approximate signal strength (number

of bands that light up). If Network notification in Wi-Fi settings is enabled,

this icon appears in the status bar whenever the phone detects an available

wireless network within range.

• Wi-Fi networks

On the Wireless controls screen, tap Wi-Fi settings, then tap the wireless

network that the phone is currently connected to. A message box will be

displayed showing the Wi-Fi network name, status, speed, signal strength, and

more.

Note: If you want to remove the wireless network settings on your phone, tap

Forget on this window. You need to enter the settings again if you want to

connect to this wireless network.

6.1.2.3 To connect to another Wi-Fi network

On the Wireless controls screen, tap Wi-Fi settings. Detected Wi-Fi

networks are displayed in the Wi-Fi networks section.

Tips: To manually scan for available Wi-Fi networks, on the Wi-Fi settings

screen, press MENU and then tap Scan.

Tap another Wi-Fi network to connect to it.

Note: If the wireless network you want to connect to is not in the list of