User's Manual

charger into the mobile phone. Then the power level indicator at upper right
screen will flash. If the phone is off when charging, the screen will display
“charging” indicating the battery is being charged. If the phone is deposited for
long time, the power indicator may take some time to appear on the screen. If the
power indicator at upper right screen of the phone displays battery full and stops
to flash, it means that the charge is done. If the phone is off, the screen will display
a Charge Completed indicator. During charge, it is normal if the battery, mobile
phone and battery charger are hot. After the charge, disconnect the AC outlet
and mobile phone with the battery charger.
This phone is just 50% charged when delivery. Please use up the power and recharge
it fully. This is the case with the second recharge. After three repetitions, the battery
can achieve its best performance.
4 Safety Password
4.1 PIN number
By setting PIN number (Personal identification number), it can prevent others from
using your SIM card without authorization.
4.2 PIN2 number
In order to go to “call cost” and “fixed dialing”, please contact your network service
provider to confirm whether your SIM card supports such functions. After 3 times
of error PIN2 number, the PIN2 number will be locked. Only after the correct PUK2
number is input can PIN2 number be unlocked. PUK2 number may be provided
along with the SIM card.
4.3 PUK number
In order to unlock the blocked PIN number, you need to input PUK number
(Personal Unlocking Key).
4.4 Mobile phone password
In order to prevent unauthorized user from using your mobile phone, you can set a