User's Manual
-22-
wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to
select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then
contact the network. A moment later, the network will make a response and send the operation results to
the mobile phone.
Hide ID: You can select hide ID, display own ID and or display ID by network.
Others: You can set IP prefix, call time minute reminder, auto redial, vibration when connected, reply
SMS after reject and auto record voice call through this function.
Phone Settings
Date & Time: set the date format, the time format, and detail time of the location.
Note: If you remove the battery from the mobile phone or if the battery energy was exhausted a long time ago,
you may need to reset the date and time when re-inserting the battery or powering on the mobile phone after
recharging.
Language settings: Select the display language for the mobile phone.
Shortcut settings: Customize the shortcut functions of the Up, Down, Left, and Right direction keys. In
the standby interface, you can press a direction key to directly enter the function menu corresponding to
that direction key.
Auto power on/off: Set the time when the mobile phone will be automatically powered on or off.
Alert: Before entering an area where the use of mobile phones is forbidden, make sure that the scheduled
power-on function is deactivated to avoid accidents.
Power management: You can view the remains power through this function.
Restore Factory Settings: Use this function to restore factory settings. The preset password is 1234.