Operation Manual

2. Press SET / ALM SET once again, the month digit will flash to the right hand side of the
display next to the weather forecast icon. Press
EN.6
/ button to set month.
3. Press SET / ALM SET once again, the date digits to the right hand side of the display nex
to the weather forecast icon will flash. Press
t
/ button to set date.
4. Press SET / ALM SET again, the time digits change to “24Hr“and flash. Press / to
select 12/24 hr time format: When the 12Hr time format is selected, the AM / PM indicator
will be displayed.
5. Then press SET once again, the time digits change to “00”and flash. Press
/ button
to select time zone:-
“00” = GMT +1 hour (e.g. Germany)
“01” = GMT +2 hours (e.g. Finland)
6. Press SET / lash. Press
“-01” = GMT 00 hour (e.g. U.K.)
ALM SET again, the hour digits will f
/ to set the hours.
7. Press SET / ill flash. Press ALM SET again, the minute digits w / button to set the
d
minutes.
8. Press SET / ALM SET to return to normal mode, or it will return to normal mode in aroun
15 seconds if no further buttons are pressed.
Remark: When your weather station is receiving radio controlled time signal, all buttons except the
e / light button will not function. snooz
If only flashes on the display then press and hold for two seconds the wave (
o
C /
o
F ) button to
cancel the automatic DCF signal.
TO SET ALARM TIME
ess SET / ALM SET once, time digPr its change to alarm time di 7:00 AL”. Then press and
onds, the hour digits flash. Press
gits “ AM
hold SET / ALM SET for 2 sec / to set your desired hours of
alarm time.
Press SET / ALM SET again, alarm minute digits flash. Press / to set alarm minutes.
Press SET / ALM SET again, time digits change to “05” and flash. Press / to set the sn
ation from 1 to 20 minutes.
ooze
l m de ds
uttons.
alarm time. When the al me is displayed press
dur
Press SET / ALM SET to return to normal mode, or it will return to norma o in around 8 secon
no further press of any other bif
TO TURN ON OR OFF YOUR ALARM
mply press SET/ALM SET to display theSi arm ti to
function is turned on, the iturn on/off the daily alarm. When the alarm con appears between the
ehour and minute digits. If you see – displayed on the outside temperature indicator then you hav not
first pressed SET/ALM SET button re-select channel 1 by pressing the button again.
TO USE SNOOZE ALARM
hen time reaches your set alarm time, your weather station will give a eep sound to wW b ake you up.
The
icon will flash.
1) Press the SNOOZE / LIGHT button once to stop the alarm temporarily, the icon keeps
flashing. The alarm will p again at your set duration. bee
2) To stop the alarm, press / CHANNEL (ALM On-Off) once, the alarm beep will stop and
icon become static, alarm will beep again at the same time the next day.
Alarm Duration: 2 minutes
Downloaded from www.vandenborre.be