Quick Start Guide

3
Thank you for purchasing the iStorage diskAshur PRO
2
. Your diskAshur PRO
2
is preformatted in NTFS and shipped
with a default Admin PIN of 11223344 and although it can be used straight out of the box with the default Admin
PIN, for security reasons, we highly recommend that a new Admin PIN be created immediately by following the
instructions under the heading ‘Changing the Admin PIN’.
Your diskAshur PRO
2
undergoes a rapid self-test to verify all security components are working properly each time
you plug into a powered USB port. The LEDs will go through 3 test stages, blinking in sequence RED, GREEN and
BLUE, followed by two GREEN blinks and then to RED (Standby State) on a successful test. Any test failure will
force the diskAshur PRO
2
to securely reset itself and automatically resume the self-test without affecting the security
characteristics or any data stored on the drive.
To unlock the diskAshur PRO
2
for the first time with the default Admin PIN, insert the integrated USB 3.1 cable to a
powered USB port and follow the instructions in the table below.
1. In Standby State (solid RED LED), enter
the default Admin PIN ‘11223344’ and then
press the ‘UNLOCK’ button.
GREEN and BLUE LEDs will alternately blink
several times and then to a solid BLUE LED
changing to a blinking GREEN and finally to a
solid GREEN LED.
Quick Start Guide
LED LIGHTS
LOCK
UNLOCK
SHIFT
DESK LOCK
SLOT CONNECTION
- Standby State/Locked
- User Mode/Unlocked
- Admin Mode
Alphanumeric
Keypad
Integrated
USB 3.1 Cable
First Time Use