User manual

#6
iStorage diskG
®
SSD Manual – v 2.1
www.istorage-uk.com
diskG SSD
2. Connecting the diskG SSD
Be sure to review the following information before you begin to use the diskG SSD.
Attention: Use only the included cables with your diskG SSD. You might damage the drive if you use a
cable not included with the diskG SSD.
1. Attach the integrated USB cable of the diskG SSD drive to an available USB port
on your computer, as shown below.
2. The diskG SSD LED indicator light should glow RED.
Note: If the LED Indicator light does not power, use the included USB Y-cable Refer to directions on the
following page