User manual

#6
iStorage diskAshur
®
Manual – v 2.1
www.istorage-uk.com
®
Be sure to review the following information before you begin to use the diskAshur.
Caution: Use only the included cables with your diskAshur. You might damage the drive if you
use a cable not included with the diskAshur.
2. Connecting the diskAshur
1. Attach the integrated USB cable of the diskAshur drive to an available USB port
on your computer, as shown below.
2. The diskAshur LED indicator light should glow RED.
Note: If the LED indicator light does not power, use the included USB Y-cable.
Refer to directions on the following page.