Datasheet

1.0 INPUT:
1.1 VOLTAGE
MINIMUM NOMINAL MAXIMUM UNITS
90 100~240 264 Vrms
1.2 FREQUENCY
47Hz ~ 63Hz
1.3 CURRENT
100Vac / 15A max.
1.4 INRUSH CURRENT
65A max. when AC input 115Vac at 25
0
C cold start.
AC input 230Vac at 25
0
C cold start power no damage.
1.5 POWER EFFICIENCY
80% (min.) at full load(typical) and 115Vac input.
1.6 LEAKAGE CURRENT
3.5mA max.
1.7 POWER FACTOR
PF > 0.9
2.0 OUTPUT:
Voltage
+12V1 +12V4 +3.3V +12V2 +12V3 +5V -12V +5Vsb
Max load
20.0A 36.0A 30.0A 20.0A 36.0A 30.0A 0.8A 3.5A
Min load
1A 1A 0.5A 1A 1A 0.5A 0.0A 0.0A
Ϡ
Ripple &
Nois
e
120mV 120mV 50mV 120mV 120mV 50mV 120mV 50mV
!ϠϠ
Regulation
+3,-3% +3,-3% +3,-3% +3,-3% +3,-3% +3,-3%
+10,-10%
+3,-5%
Max output
600W 600W 9.6W 17.5W
Total
1200W
Ϡʳ ʳ Add 0.1uF and 47uF capacitors across output terminal during ripple & noise test.
ϠϠ+5Vsb operate at 3.5A max load base on PS-ON mode. If PS-OFF +5Vsb only operate at 3A max
load.
The all of output can not connect use because they all work are independent.