Installation manual

Safety Instructions
Please read this section carefully and follow the instructions for you own safety and
proper use of the device. It also contains information on approval and interference
suppression of your machine.
Please pay attention to the warnings and instructions on the device and in the
manual.
In order to maintain this condition and ensure safe operation, users must follow the
instructions and warnings contained in this manual.
The device must be used in accordance with the instruction for use.
The electrical installation condition in the room must correspond to
the re uirements of the respective regulations.
Take care that there are no cables, particularly mains cables, in
areas where persons can trip over them.
Do not use a main connection in sockets shared by a number of
other power consumers. Do not use an e tension cable.
nly use the supplied cable.
The unit is complete disconnected from the power source, only
when the power cord is disconnected from the power source.
Therefore the power cord and its connectors must always remain
easily accessible.
Do not setup the device in the pro imity of heat sources or in a
damp location. ake sure the device has ade uate ventilation.
All plugs on the connection cables must be screwed or locked to
the housing.
Do not touch the board or any other sensitive components without
all necessary anti-static protections.
IN ATI N, P AS ISIT .ISTA USA.C
II
iStarUSA D-Storm Series