User manual

AHHYTM_E2.2.1
21/23
Application Note
Humidity Module
HYT
6.5.2 Installation of Software PCLOG
The software PCLOG is included in the labkit. Open and start the le “setup.exe“ in the path ...\Software\PCLog\
deu‘ on the enclosed CD. Please follow the installation instruction. The software is installed automatically.
Start the software PCLOG and open the option „Extras“
in the menu and click on „Activation“. The above
dialogue box will open
Now for the „Device“, select the device driver „14
Hygro-Thermometer HYTE-LOG 4800 Bd“. The activation
code will be registered automatically. Conrm the
dialogue with ‚OK‘. Now open the option „Extras“ in the
menu and then go to the sub-menu „Interface“. Put in
the corresponding interface.
The used interface – if not known – can be determined in the device manager under Windows. (Control panel P
System P Hardware P Device Manager P Connections) The PCLOG start screen appears. The measured values of the
sensors are displayed on the left side.
The measurement begins in the menu with
“Measurement” P “Start recording”. Conrm the
window selection with OK.
Now click on the thermometer icon and the icon with
the water drops in the left side panel. The corresponding
measuring curves are displayed.