Datasheet

All mechanical dimensions are valid at 25°C ambient temperature, if not differently indicated.  All data except the mechanical dimensions only have information purposes and are not to be
understood as assured characteristics.  Technical changes without previous announcement as well as mistakes reserve.  The information on this data sheet was examined carefully and will be
accepted as correct: No liability in case of mistakes.  Load with extreme values during a longer period can affect the reliability.
Released 09/2011 Rights reserved for change in technical data!
HYGROCHIP 4/5
Humidity sensors
LabKit with USB-Interface
Characteristic features
 Numerical display of current measured val-
ues and further calculated parameters
 Graphical representation of measured val-
ues as ongoing process (Online-
Visualisation)
 Recording of measured values in a file
 Limit monitoring with visual and acoustic
alarm signal
 Switch signal output over relay cards
 Conversion of physical units
 Integrated formula editor
 Integrated hx-computer for calculation and
display of Dew point, Absolute humidity,
Vapour pressure, Saturated vapour pressure
and as well as further meteorological pa-
rameters
 Extensive configuration possibilities, op-
tions and settings
Typical areas of application
 Higher end measuring technique for scien-
tific applications, laboratories, research and
for inspection and testing set-ups
 Industrial instrumentation, in storehouse,
production and in Quality assurance
Visualisation and documentation
The important feature of the software is the graphi-
cal visualisation of all measured and recorded
channels as y/t chart (Online scriber function). By
means of Click & Drag, the window section can be
enlarged and the time or temperature axis can be
scaled as desired. Multiple recording windows can
be opened simultaneously. Moreover, multiple
physical parameters can be represented in each
window in which the axis definition, colour scheme,
channel description, icons and many other options
can be freely configured. The clipboard serves as
the export function for transfer of measured data
series into a spreadsheet calculation with the help
of user friendly wizards. All tables and graphic
representations can be plotted or printed in colour.
Installation of Software PCLOG
The Software PCLOG is covered in the scope of
supply. Start the file “setup.exe“ in path
...\Software\PCLog\deu' on the enclosed CD.
Please follow the installation instruction. The Soft-
ware is installed automatically.