Installation Guide

high hardness
Incorrect regeneration cycle setting
Reset the regeneration cycle
according to the manual.
The water hardness adjustment nut is
leaking or opened too far
Close the water hardness
adjustment nut or readjust the
flow of the water hardness
adjustment nut.
Bypass leaking
Replace the gasket.
Brine tank overflow
Replenishment time is exceedingly
high
Reset the replenishment time.
The machine is leaking
Turn off the machine and
contact iSpring.
Need help with troubleshooting? If you have any questions or find there are missing parts
ordamage, please call 1-678-261-7611 or visit www.ispringfilter.com
When calling, please be prepared to provide the model of your product.
(The model of this product is "WCS45KG".)
www.123filter.com | [phone] | [e-mail] Page 26