Use and Care Manual

Product Operation & Specifications
Though testing was performed under standard laboratory conditions, the actual performance of the
system may vary based on local water conditions and quality.
SPECIFICATIONS
Model WCFM400K
Hydrostatic Test Pressure
350 psi (24.15 bar)
Working PressureLimits (minimum/maximum)
35~100 psi
Water Temperature Limits (minimum/maximum)
39~100 °F
(4~38 °C)
Water pH Range
6.8~9.0
Electrical Adapter
Input: AC120V, 60Hz
Output: AC12V, 650mA
Pressure Tank Thread
2 1/2″ NPSM
Inlet/Outlet Connector
1″ NPT
•
Alkalinity should be greater than two times the combined sulfate and chloride
concentration.
• Free chlorine concentration should be less than 0.5 ppm.
• Hydrogen sulfide, oil, and polyphosphates should be removed.
•
Organic matter should not exceed 4-5 ppm.
*Independent 3
rd
party laboratory test data.
Page 5 www.123filter.com | [phone] | [e-mail]