Install Instructions

- 6 -
Please cut the tubing in an appropriate length to avoid kinking. Please make sure the tubing is fully inserted into
the quick-fitting connection about one half-inch deep in order to be sealed by the O-ring at the bottom.
8) Connect the UV transformer to an electrical outlet.
9) Turn on water supply and faucet. Observe the system for any leaks and check if water flow activates the UV light.
Maintenance
- For your safety, ALWAYS wear goggles and turn the power OFF before REPLACING the UV lamp or CLEANING the quartz
sleeve! Servicing the unit with power on will also cause damage to the ballast. Never service the UV lamp or quartz sleeve
without wearing protective eyewear!