Instructions / Assembly

3. Structure diagram of horizontal UV-C water sterilizer：
4. Front panel diagram of horizontal sterilizer
①：
Timer or UV radiation intensity
monitor
②：
Green working light,
Red warning light,
Indicator lights listed from right to
left as 1,2,
3、、
③：
Power switch
5. Diagram of the back of control box
①：
Wiring box
②：
Power switch
③：
Ballast base
④：
Ballast
⑤：
Red/green indicator lights
⑥：
Timer or UV radiation intensity
monitor
The ballasts from left to right are backup ballast, first one, second one, third one、、、The
order of indicator lights is the opposite.
C
、
Mounting steps and matters need attention
1. Before mounting please refer to the “Structure diagram of ultraviolet water
sterilizer” to learn about sterilizer components. Mounting the sterilizer according
to the “mounting steps and matters need attention” in user manual.
2. If you choose vertical mounting, make sure that water flow in at a lower level and
out at a higher level to lower down the flow speed to increase radiation.
3. If water current exceeds rated flow please fix current-limiting or pressure-limiting
device.
4. If water pressure is over 3kg, please fix a check valve in the inlet/outlet in order to
protect the quartz sleeve.
5. If the normally closed solenoid valve is needed, please fix it in the inlet.
2