Instructions / Assembly

Step 3- Install the New Cartridge
3.1 Remove the new filter packaging and insert the filter cartridges into the housings,
making sure they slip over the bottom standpipe.
3.2 Align the bottom of the housing with the cap and hand tighten, then use the filter
wrench (AWR3) until snug.Do not over-tighten.
3.3 Close any open valves. Turn on the water supply slowly to allow the system to fill
with water.Inspect carefully for leaks.If a leak is found, remove the housing and inspect
the O-ring to ensure that it is seated properly, and then retighten.
Step 4- Flush the System
4.1 Flush the system by turning on a cold-water faucet. Allow the water to run until the
air and carbon has been purged. Water may initiallyappear cloudy as the filters and
system remove trapped air. New activated carbon filter cartridges may contain loose
carbon and air bubbles after installation.
Warranty Registration
To register your product for its eligible warranty, please visit our website at 123filter.com and
go to the “Warranty Registration” tab.
We provide a 30-day money back guarantee, a 1-year manufacturer warranty, and lifetime tech
support for all of our products. However, we do not access and store order information from
websites other than 123Filter.com (including Amazon, Home Depot, etc.), so be sure to fill in
that information upon registration of your system. If you have any questions or concerns about
your product, please do not hesitate to call or email us, or submit your feedback in the
notes/comments during warranty registration. Your satisfaction is our business!
If you are happy with our products and service, please show your support by
writing a product review on Amazon. Even just a quick statement means a lot to
us. Thank you!
Contact Us
Office Hours: Mon-Fri, 8:30 am – 5:30 pm EST
Phone: [phone]
Email: [e-mail]