We stand behind our products Since 2005, iSpring has been dedicated to providing high-quality drinking water to families across the United States. We provide various residential faucets and water filtration systems that purify your water in everyday life and deliver pure, healthy, and tasty water to you and your family. At iSpring, we strive to develop products to the highest of standards and aim to make excellent drinking water accessible for all households.
Prior to Installation Read this instruction manual carefully prior to installation. Keep this manual readily available for future reference. Table of Contents Important User Information ...................................................................................... 3 Product Introduction Product Structure Diagram............................................................................................ 4 Product Feature ...............................................................................
Important User Information The user must adhere to the installation specifications described in this Product Installation and Operation Manual (hereinafter referred to as the "instruction manual"). iSpring is not responsible for damage, loss, or injury resulting from neglect, improper maintenance, or unauthorized modification of products. ● The unit should be placed only on flat surfaces. Do not mount on a wall. ● This product is designed for residential use only.
Product Introduction ▪ Product Structure Diagram ① PPC Composite filter ② RO Membrane filter Front Back Side View www.123filter.com | (678) 261-7611 | support@123filter.
▪ Product Features • Instant treated water accessibility – no tank, no wait. Up to 0.6 gallons per minute flow rate.* • Up to 95% rejection rate.* • Easy twist off filters without cutting off the water supply. – Filter changed in seconds. • Up to 2.5 to 1 pure to drain ratio.* • Plug and play with automatic pre-flush and filter life reminder, both on system and faucet. *Tested at 60 psi water pressure, 150 ppm at the temperature of 77°F. Actual performance varies based on source water quality.
Usage Instruction ▪ Warning This instruction includes important product safety information. Please read this manual thoroughly prior to installation. Failure to follow the listed precautions may end up with personal injury or property damage, or both.
System Installation ▪ Installation preparation 1. Check and make sure the package is in good condition and everything in packing list is included in the package. Contact iSpring Customer service if there is any missing part. 2. The system must be installed at a location that has access to power plug, with flat surface that is kept away from direct sun light or freezing environment. The incoming water pressure must be at least 30 psi. 3.
▪ Install the faucet Drill a hole on the countertop if there is not one available. 1. Choose a suitable location on the sink or countertop and install the faucet on a flat surface as shown in the image below. You will need to drill an 1" hole (no larger than 1 1/2") if your kitchen sink does not have an existing one. ► How to drill a 1" hole in your sink or counter-top a.
g. Once breaking through the smooth surface, swirl the drill a little to apply pressure in a circle evenly. Be patient and deliberate. It can take 20 – 40 minutes to drill through one inch. Place the faucet in the hole and refer to the following image. ▪ Connect the system with power cable and PE water tubing Refer to the following diagram for water tubing and power cable connections. Page 9 www.123filter.com | (678) 261-7611 | support@123filter.
a. Cut the WHITE 3/8" PE tubing to the appropriate length using a utility knife based on the system position. b. Insert one end of the tubing into the feed water adapter quick fitting. Make sure at least 1/2" of the tubing is inserted. The tubing should not be able to pulled out by hand. Put on the locking clip after the tubing is secured. c. Insert the other end of the WHITE tubing into the 3/8" port marked with "Inlet water" at the top rear of the system.
f. Connect the other end of the 1/4" BLUE tubing to the previously installed smart faucet. The faucet came with a 1/4" quick fitting. Like other quick fitting installation, make sure at least 1/2" of the tubing is inserted into the faucet fitting. The tubing should not be able to pulled out by hand Secure the connection by inserting the enclosed 1/4" locking clip. g. Choose a spot on the drain pipe that is convenient for installing the drain saddle and tubing.
Using the system ▪ System Startup a. To start the system, plug it in, turn on the feed water adapter, then turn on the faucet. Vibrations can be expected as the pump starts. b. Turn on the faucet and let it run for at least 30 minutes to rinse the system. This should be done each time the PPC filter is replaced. Refer to the below "Display and Operating Area" section for more information about manually flush the system after the membrane has been replaced. c.
Reset filter: Filter life indicating lights remain to be white and started to blink in white when the corresponded filter life has less than 10% remaining, then turn red when the filter needs to be replaced ASAP. Filter life indicator must be reset each time the filters is replaced. To replace the filter, 1. Shut off the water supply and turn on the faucet to drain the remaining water in the system. 2. Unplug the power adapter. 3. Press the button on the filter to release filter lock.
▪ Malfunction Inspection Malfunction No water output Possible Issue Possible solution Is the water inlet valve turned on? Turn on the water supply The filter was not installed correctly Correct assemble the filter The system is not connected to the Check the power power Less water The connection pipe is twisted or bent Check the connections output The inlet valve opens too small Open water inlet valve completely Low temperature especially in winter When the temperature decreased, the water
Warranty This Limited Warranty extends to the original purchaser of the system only. This warranty covers all Manufacturersupplied items only that prove to be defective in material, workmanship, or factory preparation. This warranty covers parts only; all labor is excluded from this warranty, including, but not limited to, services related to the removal, replacement, installation, adjustment, maintenance, and/or repair of the unit or its components items.
Warranty Registration To register your product for the warranty, visit our website at 123filter.com and go to the "Warranty" tab. We provide a 30-day money-back guarantee, a 1-year manufacturer warranty, and lifetime tech support for all of our products. However, we do not have the order information from websites other than 123Filter.com (Amazon, Home Depot, etc.), so please be sure to fill in that information upon registration of your system.
Atlanta, GA USA iSpringFilter.com For questions, comments, or technical support, contact us at: support@123Filter.com (678) 261-7611 Monday-Friday 8:30 a.m. - 5:30 p.m.
