Instructions / Assembly

2) Water Treatment Process
Municipal tap water→ composite filter→ reverse osmosis filter→ post-activated carbon filter→
purified water
3) Filtration Performance
Filter
Purpose
Composite filter
Removes unpleasant chlorine, taste, odors, cloudiness and
coloring.
Removes dirt, sand, silt, rust and scale particles and absorbs
THMS, VOCs and pesticides.
Reverse osmosis
memberane
Removes heavy metals and contaminants using a .0001 (one ten-
thousandth) micron membrane.
Carbon block filter
Further enhances the sense and taste of the water.
4) Specifications
5) Filter Service Life Table:
Filter Recommended
replacement cycle
First stage composite
filter
6 months
Second stage reverse
osmosis membrane
24 months
Third stage carbon block
fitler
12 months
• This system works at maximum performance when connected to a municipal water supply with
an inlet pressure of 60 psi and a temperature of 75°F.
• The actual water flow rate will vary depending on a number of factors, such as water quality,
high TDS (500 ppm+), low temperatures (below 55°F), and low pressure (below 25 psi). These
will limit the performance of the system and reduce the filter’s life.
Model
Specification
Working Pressure
15 - 70 psi
Working Temperature
41–100°F
Flow Rate of Purified Water
Up to 0.4 gal/min
Power Specifications
Input
：
100-240V AC
Output
：
24 DC
Page 5 www.123filter.com | [phone] | [e-mail]