Use and Care Manual
Table Of Contents
- We stand behind our products
- Packing List
- Product Features
- Prior to Installation
- Installation
- Step 1. Install Feed Water Adapter (AFW43)
- It is highly recommended that you watch the video ''How to Install a Feed Water Adapter for Reverse Osmosis (RO) and Other Applications | iSpring AFW43'' on YouTube.
- Turn off the Cold Water Supply Valve (CWSV) under the sink and open the kitchen faucet to release pressure. Prepare a towel or bucket to catch any water drips. Disconnect the kitchen faucet connector pipe from the CWSV.
- Step 2. Install Drinking Water Faucet
- Drill a hole to install the faucet
- Install a faucet bracket (included) instead of drilling a hole (Optional)
- How to Drill a Hole in Sink or Counter-top
- Step 3: Install the System
- Step 4. Tubing Connection
- Install the tubings onto the inlet and outlet of the system. Follow the quick connect instruction to properly connect the system.
- Note: Make sure that water flows in the correct direction from the 1st stage to the 4th stage.
- /
- Step 5. System Start-up
- Make sure no tubing is kinked. Place a towel under the system to catch any possible water leaks.
- Open the drinking water faucet. Slowly turn on the Feed Water Adapter (AFW43) and check for leaks. The top 3 causes of leaks are 1) The tubing is not fully inserted into the quick-connect fitting. 2) The O-ring is not in the correct place or is kinked...
- Rinse the system for 5-15 minutes. It is normal to see residual carbon and fine air bubbles in the water when flushing the system for the first time.
- Check for leaks daily for the first two weeks after installation to ensure the system is functioning properly.
- Maintenance
- Optional Add-on
- Troubleshooting
- Warranty
Warranty
This Limited Warranty extends to the original purchaser of the system only. This warranty covers all Manufacturer-
supplied items only that prove to be defective in material, workmanship, or factory preparation. This warranty covers
parts only; all labor is excluded from this warranty, including, but not limited to, services related to the removal,
replacement, installation, adjustment, maintenance, and/or repair of the unit or its components items. Excludes all non-
Manufacturer labor required for any servicing of the unit, including, but not limited to, servicing related to installation,
adjustment, maintenance, and repair of the unit. This warranty applies only for the first full calendar year from the date
of purchase. The following items are excluded from this warranty: membranes, filters, O-rings, and all other parts or
components that require regular replacement as a result of ordinary usage.
Disclaimers: This Limited Warranty applies only if the system is installed, used, and maintained in compliance with all
instructions and requirements enclosed with the system. This warranty will be void for failure to observe the following
conditions:
1. The system is to be used with a potable water supply only.
2. Feed water pressure to the unit is no less than 20 psi and no greater than 80 psi.
3. Feed water temperature to the unit must be no less than 40°F and no more than 100°F.
4. Total dissolved solids (TDS) in feed water must be less than 1000 mg/L (ppm).
While the testing was performed under standard laboratory conditions, actual performance may vary. The Manufacturer
does not know the characteristics of your water supply. The quality of water supplies may vary seasonally or over a
while. Your water usage may differ as well. Water characteristics can also change if the drinking water appliance is
moved to a new location. The Manufacturer assumes no liability for determining the proper equipment necessary to
meet your requirements, and we do not authorize others to take such obligation on our behalf.
This Limited Warranty does not cover any Manufacturer-supplied items that are defective as a result of the use of
improper parts, equipment or materials. This warranty does not cover alterations or modifications of the unit or failure
of a unit caused by such alterations and modifications.
This Limited Warranty does not cover malfunctions of the unit due to tampering, misuse, alteration, lack of regular
maintenance, or misapplication. In addition, damage to the unit due to fire, accident, negligence, the act of God, or
events beyond the Manufacturer's control is not covered by this warranty.
Incidental and Consequential Damages Limitation: The Manufacturer will not be responsible for any incidental or
consequential damages as a result of the failure of this unit to comply with express or implied warranties or any defect
in the unit, including but not limited to, lost time, inconvenience, damage to personal property, loss of revenue,
commercial losses, postage, travel, telephone expenditures, or other losses of this nature. In case some states do not
allow the exclusion or limitation of incidental or consequential damages, you may choose to return the system. If you
choose to keep it, you insist this exclusion STILL apply to you.
Owner's Warranty Responsibilities: As a condition of this Limited Warranty, the owner must ensure that periodic
maintenance of the system is performed as described in the literature enclosed with the system. Neglect, improper
maintenance, abuse, modification, or alteration of the unit will invalidate this Warranty. Should your unit develop a
defect or otherwise fail to perform by this warranty, you should contact the retailer from whom the product was
originally purchased.
Implied Warranties: The implied at-law warranties of merchantability and fitness for a particular purpose shall
terminate on the date one year after the date of purchase.
NOTE: IN CASE SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, YOU MAY CHOOSE TO RETURN THE SYSTEM. IF YOU CHOOSE TO KEEP IT, YOU AGREE THAT
THE ABOVE LIMITATIONS STILL APPLY TO YOU.
Page 9 www.123filter.com | (678) 261-7611 | support@123filter.com