Copyright ©2005-2022 ISPRING WATER SYSTEMS, LLC. All rights reserved.
We stand behind our products Since 2005, iSpring has been dedicated to providing high-quality drinking water to families across the United States. We provide various residential faucets and water filtration systems that purify your water in everyday life and deliver pure, healthy, and tasty water to you and your family. At iSpring, we strive to develop products to the highest of standards and aim to make excellent drinking water accessible for all households.
Packing List Pre-assembled System Plumber's Tape Drinking Water Faucet Feed Water Adapter (Model: AFW43) Tubing and Spare Parts Faucet Hanger Product Features Parameter Inlet Water Pressure Inlet Water Temperature Maximum Inlet Water TDS Value Filtered Water Flow Rate • • • • • Specification 20 - 80 psi 40 - 100 °F 1000 ppm 0.56 GPM @ 45 psi If the inlet water pressure is less than 20 psi, a booster pump is needed.
Prior to Installation Before you start the installation • • • Choose a suitable location for the system. Again, it must be placed on a flat surface and make sure this system is to be installed on INDOOR cold-water supply ONLY. Check the packing list to confirm all accessories are included in the package. Contact iSpring customer service if any components are missing.
Installation Step 1. Install Feed Water Adapter (AFW43) It is highly recommended that you watch the video ''How to Install a Feed Water Adapter for Reverse Osmosis (RO) and Other Applications | iSpring AFW43'' on YouTube. A. Turn off the Cold Water Supply Valve (CWSV) under the sink and open the kitchen faucet to release pressure. Prepare a towel or bucket to catch any water drips. Disconnect the kitchen faucet connector pipe from the CWSV. B.
B. Install a faucet bracket (included) instead of drilling a hole (Optional) a. Mount the bracket to the sidewall of the cabinet. b. Insert the faucet stem into the hole on the bracket. Slip on the back rubber washer. c. Tighten the nut with the plastic wing. d. Insert the tubing about 1/2" into the push-in fitting and secure it with the clip. How to Drill a Hole in Sink or Counter-top 1. It is highly recommended that you watch the YouTube video "How to Drill Faucet Holes." 2.
Step 4. Tubing Connection Install the tubings onto the inlet and outlet of the system. Follow the quick connect instruction to properly connect the system. Note: Make sure that water flows in the correct direction from the 1st stage to the 4th stage. Step 5. System Start-up A. Make sure no tubing is kinked. Place a towel under the system to catch any possible water leaks. B. Open the drinking water faucet. Slowly turn on the Feed Water Adapter (AFW43) and check for leaks.
Maintenance All iSpring Water Filter Systems are designed with ease of use and low maintenance in mind. If the filter cartridges are changed on schedule as suggested, the system will work properly for years to come. See the chart below for the filter pack model numbers for your system. The filter packs can be found on 123filter.com, Amazon, or HomeDepot.com.
Optional Add-on Ice Maker Connection Kit (Model# ICEK) The iSpring ICEK can be purchased separately to feed water to your refrigerator for crystal clear ice cubes and great tasting water. It can be easily installed to connect the CU-A4 system to the ice maker or water dispenser of your fridge. Tubing (Model# T14B or T14W) 1/4'' food-grade tubing in a 50' roll, which is good to use for tubing replacement and extension as needed.
Warranty This Limited Warranty extends to the original purchaser of the system only. This warranty covers all Manufacturersupplied items only that prove to be defective in material, workmanship, or factory preparation. This warranty covers parts only; all labor is excluded from this warranty, including, but not limited to, services related to the removal, replacement, installation, adjustment, maintenance, and/or repair of the unit or its components items.
Warranty Registration To register your product for the warranty, visit our website at 123filter.com and go to the “Warranty” tab. We provide a 30-day money back guarantee, a 1-year manufacturer warranty, and lifetime tech support for all of our products. However, we do not have the order information from websites other than 123Filter.com (Amazon, Home Depot, etc.), so please be sure to fill in that information upon registration of your system.
¡ ¡
