Instructions / Assembly

iSpring
Water
Systems
1. Choose a spot on the drain pipe that is convenient for installing the
drain saddle and tubing. A horizontal pipe is recommended to minimize
the dripping sound.
2. Drill a 1 /4” hole in the drain pipe, and paste the black sticky pad
around the hole.
3. Cut the drain tubing end to make a 45 degree angle. Insert the tubing
into the blue quick tting in the front plate . Insert the tubing into the 1 /
4” hole in the drain pipe, install the back plate, and tighten the two screws
with hex nuts while the tubing remains in the hole.
4. Tighten the nut on the Drain Saddle by hand. Pull the tubing lightly to
make sure it is secure.
Installing a ADS1K Drain Saddle