PATENTS PENDING
Congratulations on your purchase of the VECTOR SL CABINET. You are now the owner of the most innovative guitar subwoofer speaker cabinet ever produced. The patent pending VECTOR SL ACTIVE GUITAR CABINET has bass on tap, designed as the perfect complement with maximum performance when used with the THETA HEAD. Years of experience in designing the highest performance Active Sound Reinforcement cabinets has allowed ISP Technologies engineers to develop the ultimate Active guitar subwoofer cabinet.
PRECAUTIONS NOTE: IT IS VERY IMPORTANT THAT YOU READ THIS SECTION TO PROVIDE YEARS OF TROUBLE FREE USE. THIS UNIT REQUIRES CAREFUL HANDELING. All warnings on this equipment and in the operation instructions should be adhered to and all operating instructions should be followed. Do not use this equipment near water. Care should be taken so that objects do not fall onto and liquids are not spilled into the unit through any openings.
VECTOR SL CONCEPT The VECTOR SL was designed for ease of use; simply connect the speaker output of the THETA HEAD, or any other guitar amplifier, to the input of the VECTOR SL like you would any other speaker cabinet. Connect your favorite speaker cab to the external output, set the impedance switch to the impedance of your cabinet, and get ready to unleash the most unbelievable low-end punch and bass performance you have ever heard in a guitar system.
VECTOR SL CABINET BACK PANEL CONNECTIONS 1. INPUT JACK Connect the speaker output of your guitar amplifier to this input jack. The VECTOR SL will internally attenuate the speaker output and apply this signal to the input of the internal D-CAT amplifier to drive the subwoofer. 2. SUB LEVEL The SUB LEVEL adjusts the output level of the VECTOR SL’s internal subwoofer. 3. INPUT JACK Connect the speaker output of your guitar amplifier to this input jack.
SYSTEM CONNECTIONS
FUSE REPLACEMENT 1. Use a small screwdriver as shown to slide the fuse cover out from the power inlet module. The fuse can be found inside the fuse cover module after it is pulled out. NOTE: A SMALL COMPARTMENT IS ALSO PROVIDED WITHIN THE FUSE COVER MODULE FOR STORING A SPARE FUSE. 2. After replacing the fuse with another of identical specifications, push the fuse cover module fully back into place, ensuring that the fuse has snapped onto the fuse holder inside the power inlet module.
WARRANTY AND SERVICE The unit, parts and workmanship are fully guaranteed to be free of defects under normal use and service for a period of 3 year from the date of purchase. Any damage resulting from the misuse or the failure to follow the precautions and instructions will void the warranty. In the event that the unit needs to be repaired, please return the unit to ISP Technologies directly.
