SDS

Safety Data Sheet
Date of Issue: September 14, 2022 File No.: GFCB20220804WERCS02
Page 3 of 12
No information available.
3. Composition/ Information on Ingredients
Chemical Name
CAS No.
Weigh%
Aluminum(Al)
7429-90-5
6.02
Copper foil
7440-50-8
9.15
Lithium Cobalt Dioxide
12190-79-3
40.87
Styrene Butadiene Rubber
9003-55-8
0.38
Carbon
7782-42-5
18.83
Carboxymethyl cellulose
9004-32-4
0.32
Polypropylene
9003-07-0
5.00
Ethyl Methyl Carbonate
623-53-0
5.14
Lithium Hexafluorophosphate
21324-40-3
4.27
Ethylene Carbonate
96-49-1
4.82
Dimethyl Carbonate
616-38-6
5.2
4. First Aid Measures
4.1 General Advice
First aid is upon rupture of sealed battery.
4.1.1 Eye contact
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep
eye wide open while rinsing. Remove contact lenses, if present and easy to do. Continue
rinsing. Do not rub affected area. Seek immediate medical attention/advice.
4.1.2 Skin Contact
Wash off immediately with plenty of water and soap for at least 15 minutes. Remove and
isolate contaminated clothing and shoes. Get medical attention if irritation develops and
persists.
4.1.3 Inhalation of Vented Gas
Remove to fresh air. Get medical attention immediately if symptoms occur. If not breathing,
give artificial respiration. If breathing is difficult, (trained personnel should) give oxygen.
4.1.4 Ingestion
Do NOT induce vomiting. Rinse mouth immediately and drink plenty of water. Never give
anything by mouth to an unconscious person. Call a physician or poison control center
immediately.
4.1.5 Self-protection of the first aider
Ensure that medical personnel are aware of the material(s) involved. Take precaution to