User manual

Putting into operation
Before putting into operation, please fully charge the batteries (at least 12 hours, even
if the charging indicator light is on steady). Only use the device after that.
The charging indicator light flashes red during the charging process. Once the batteries
are fully charged, the indicator light is on steady. When the charging process is ended
or the USB cable is disconnected from the device, the indicator light turns off and the
device is ready for mobile use.
Technical data
Battery-operated: 3 x AAA Micro 850 mAh rechargeable batteries (included)
PIR-effective range: approx. 10 m/120°
Frequency: 18 - 24 kHz +/- 10%, max. 110 dB
Displays: LED indication for charging (blinking when charging,
permanent light when fully charged)
USB-operation: cable included
USB charging: approx. 12 hours, overcharging protection integrated
Switch: OFF- ON = PIR + sound or ON sound
Operating temperature and huminity: - 20C° to +50 C° and ≤ 90% R.H.
Storage temperature and huminity: - 5C° to +50 C° and ≤ 90% R.H.
Replacement of the rechargeable battery
1. Unscrew and remove the housing cover.
2. Remove the old rechargeable battery from its fitting.
3. Insert a new rechargeable battery size Micro (AAA) and type Ni-MH with 1.2 V and
850 mA. When doing so, mind the correct polarity as shown on the bottom inside the
battery fitting.
4. Reattach the casing cover to the casing body and screw the casing in place again.
General information
1. Electric appliances, packaging material etc. should be kept away from children.
2. Dispose packaging and worn out material correctly and in an environmentally
friendly way.
3. Do only pass on the device including the operation manual.
4. Subject to change of design and technical data without notice for the sake of
constant product improvement.
Instruction for safe use: