Product Manual
User Manual
47
4.1 Installaon
Isotherm refrigerators have been designed and constructed exclusively for recessed
installaon and installaon that is in compliance with standard dimensions. The
refrigerator must always be in a horizontal posion, with the compressor’s rubber
feet at the boom. The compressor is capable of funconing at angles of up to 30°.
The compressor can become damaged with any higher inclinaons.
In the CR42 model, the compressor is installed on a removable corner plate and
comes supplied with extra tubing made from a parcularly exible material, so it can
be set for remote operaon up to nearly 1.5m from the refrigerator. The tubing must
be carefully arranged so that it does not get pinched or broken at the curves.
Also remote operaon compressors must be installed with its rubber feet downward.
Mounng anges are available as an accessory in order to simplify the refrigerator’s
installaon (for models that don’t come supplied with a standard fastening ange).
The refrigerator must always remain resng upon its rubber support feet, and must
be xed in place by the mounng anges.
Elegance models can be xed to the lodgings by means of the Easy Fix system. This
system involves four special pre-drilled points inside a trunk, for easy and eecve
installaon that is not visible from the outside (Fig. 12).
With Easy Fix, you can install Cruise Elegance units with the door ush to the
furniture without using a special mounng ange. For this installaon, you must
leave 10 mm of space between the refrigerator and the furniture unit at least for the
enre thickness of the door, thus ensuring its free movement (Fig. 11).
When it is not possible to use the mounng ange, secure the refrigerator in such
a way so that it will not p/slide forward when the drawer is opened or in the case
of sudden vehicle movement. The unit should be anchored by at least 2 fastening
points, in accordance with the provisions of the EN 60335-2-24 standard.