Installation Guide

Bamboo Flooring Rugs Placemats Shades
USGBC, NWFA, and WFCA Member
P.O. Box 2704 26300 SW 95
th
Avenue, Suite 103, Wilsonville, OR 97070 USA Telephone [phone] Facsimile [phone]
Email: [e-mail] Websites: www.wellmadecorp.com and www.bamboofloorings.com
different colors, so you can achieve a look that you will find most pleasing. Grout is generally applied so that finally, about
¼ to ½ the pebble is above the grout. Grout an area of about 2 x 2 feet square at a time and cover the pebbles
completely. When the grout becomes firm, you can remove excess grout with a brush or damp sponge, based on how
much of the pebbles you wish to expose. Use a damp sponge for cleaning and removal of the haze of the grout. This
may need to be done several times to completely remove all residue, and then buff off any remaining grout with a soft dry
cloth. Once the grout is completely dry and clean (usually 24 hours), we recommend that you apply another coating of
sealer. Reapply sealers as recommended by their manufacturer for maximum results.
Cleaning:
Wellmade Pebble Tiles can be cleaned with neutral mild detergents, a vinegar solution, or a 10% hydrochloric acid
solution mixed with water. Apply with a stiff bristled brush and then rinse with clean water.
!CAUTION: Rubber gloves should always be worn when working with cement based products.
Please keep Pebble Tiles out of reach of children and pets, as they may present
a choking hazard.
Congratulations! You have just finished a natural, beautiful, and unique Wellmade Pebble Tile installation. We are
confident this will bring you pleasure for many years to come!
Related products available from Wellmade®: Pebble Border, Loose Pebbles, Pebble Table Runners & Placemats, &
Pebble Stone Door Mats and More.
Customer service 1-866-582-0848 in USA.
WARRANTY
Wellmade Pebble Tiles are a natural product and will therefore have imperfections in their structure, coloring,
and polishing. Should you receive cartons that contain many broken or unattached pebbles, or if there are
excessive amounts of adhesive in the surface, please return to your dealer for replacement. It is considered
normal for occasional pebbles to become dislodged from the mesh backing. They can be easily replaced by
adding some construction adhesive to the bottom of the pebble, and replaced on the mesh backing. Pebble Tiles
must be inspected before installing, as Wellmade will not accept responsibility for installed Pebble Tiles. In
addition, Wellmade cannot be responsible for the installation or related issues under any circumstances.
This writing is the complete and exclusive statement of the Warranty, and is in lieu of all other expressed,
implied, and/or statutory warranties. We assume no liability for incidental or consequential damages. The sole
remedy provided herein, is the replacement or refund for defective products. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you.