Owners Manual

Manufacturer of Quality Air Conditioning and Heating Products • www.islandaire.com • [e-mail] • (800)-886-2759
42
Temperature Limiting
Set Temperature Limiting
HOW TO SET THE HEATING AND COOLING LIMITS
Setting customized temperature set point ranges can save
energy costs by limiting extreme settings.
To enter the Set point setup mode, hold down the FAN +
WARM buttons for 5 seconds.
While the unit is in this mode, you can now scroll
through a series of codes (R1, R2, R3, R4, etc.) to select
the desired temperature limiting setting. To move from
one code to the next, press the Fan + Warm buttons
together to move to the next code on the digital display.
See chart at right for the codes and the set point range
they each represent.
To accept the new set point, release the buttons for 10
seconds when the desired code is displayed. e change
will take eect when the ON/OFF key is pressed a second
time, returning the display to normal function.
To cancel the change, wait 10 seconds without pressing
the ON/OFF button a second time.
AUTO
R1
Fan
&
Warm
Figure 46
Display - Temp Limit Code
Available Set Point Ranges
DISPLAY CODE LOW LIMIT
(DEGREES F)
HIGH LIMIT
(DEGREES F)
R1 63 86
R2 65 86
R3 65 90
R4 67 88
R5 67 92
R6 69 90
R7 68 72
R8
(FACTORY DEFAULT)
60 90