iSkin fuze 360 Install Guide
Prepare the iPhone
Step 1 Clean the iPhone 5 to remove dust, smears and lint using the included LCD wipe and microfiber cloth.
Installing the ProTouch® Titan Film
! Step 1 Gently lift and peel tab A to remove the protective layer and dispose. Do not touch the exposed area of the film after removing the A tab.
Step 2 With the A side facing down towards the screen, align the film over iPhone 5’s screen as shown.
Step 3 Release the film onto the screen’s surface and smooth out any air bubbles that may have formed.
Step 4 Gently lift and peel tab B to remove the protective layer and dispose.
Installing the fuze 360
Step 4 Release the film onto the screen’s surface and smooth out any bubbles. Step 1 Place the iPhone 5 into the back portion of the fuze 360 starting with it’s left side.
Step 2 Snap the rest of the iPhone 5 into the fuze 360 case.
Step 3 Attach the top portion of the fuze 360 by first aligning the puzzle piece at the top as shown.
Step 4 Snap all corners of the case to secure the top portion to the iPhone 5.
Step 5 Ensure the Lightning Port protector is secured.
How to Remove
Step 1 Gently pry apart by lifting the top portion from silence switch opening.
Step 2 Gently unsnap the top portion and fully separate. Remove the iPhone from the bottom portion of the fuze 360.
For more information visit iSkin.
