Pac Isimple Connect Premium Factory Radio Interface Manual

7
SCC1 Operation
4.Non-Navigation Radios
Entering Mode Select Menu
Press the “BAND” button a few times until XM is displayed on the screen.
Immediately turn the rotary TUNE KNOB in the top right hand corner to scroll
through
available sources. Once “SIRIUS” is displayed, press the “FWD>>” butto n
to select the displayed mode.
Channel Up
Turn the rotary TUNE KNOB clockwise to move up through the channels
Channel Down
Turn the rotary TUNE KNOB counter-clockwise to move down through the channels
Category Selection
Press the “CAT” button then press the button that corresponds with the Category you
wish to select.
Store Presets
Press and hold the preset button on which you want to store the channel.
Please Note: If you are using the Media Connect to add Sirius but
still have factory XM installed, it is important to keep the presets in
seperate banks.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display:
Press the “i” button to display artist and track information
Steering Wheel Controls
Press the “▲” button to cycle up through the categories.
Press the “▼” button to cycle down through the categories.
Press the “►I” button to move up through the channels.
5. Navigation Radios
Entering Mode Select Menu
Press the “XM” icon on the navigation screen. Immediately turn the rotary TUNE
KNOB in the top right hand corner to scroll through
available sources. Once
“SIRIUS” is displayed, press the “
►” icon on the screen to select the displayed
mode.
Channel Up
Turn the rotary TUNE KNOB clockwise to move up through the channels.
Channel Down
Turn the rotary TUNE KNOB counter-clockwise to move down through the channels.